Make the key fit bort truck lock

Discussion relating to the Scirocco 1974-1981 - please ask technical questions in the technical/trouble shooting section

Moderator:Scirocco Register

alriksson
Posts:13
Joined:Fri Feb 12, 2016 3:05 pm
fill in the right answer:15
Make the key fit bort truck lock

Post by alriksson » Mon May 09, 2016 7:20 pm

Hi! My lock on the trunk stopped work a few days ago in open mode, the key just won't go in the hole. I believe something inside got loose and fell in the cylinder somehow..

Anyway I got a new cylinder, the one on the attached picture. But I don't have a key for it. So question is, can I use parts from my old cylinder to make the new one open with my key? If so, how? I can't figure out how to open the cylinder..

One more question: I just have one key to my car and would like to order one from eBay so a lock smith here in Sweden can make a copy. But I've seen its different profiles on eBay, AH and HV. Which one would I order?

Cheers,
Joakim, Sweden



alriksson
Posts:13
Joined:Fri Feb 12, 2016 3:05 pm
fill in the right answer:15

Re: Make the key fit bort truck lock

Post by alriksson » Mon May 09, 2016 7:21 pm

image.jpeg
image.jpeg
You do not have the required permissions to view the files attached to this post.



DannyH
Posts:585
Joined:Wed Apr 01, 2009 11:21 am
fill in the right answer:10
Location:Todmorden

Re: Make the key fit bort truck lock

Post by DannyH » Mon May 09, 2016 7:24 pm



Danny

alriksson
Posts:13
Joined:Fri Feb 12, 2016 3:05 pm
fill in the right answer:15

Re: Make the key fit bort truck lock

Post by alriksson » Mon May 09, 2016 11:00 pm

Thank you so much :)