Exterior moulding rear arch and sill removal

Bodyshell and Panels; Fittings; Dashboards; Interiors; Bumpers; Light clusters front and rear (non electrical queries) Grilles and brightwork; Repairs including to bulkhead due to clutch cable pulling through

Moderator:Scirocco Register

Forum rules
Hints, tips and guides for repair and modification - the FAQ section on the main website is worth checking first for information relating to common faults and technical help. Useful posts and guides will be added to the FAQ http://www.sciroccoregister.co.uk/scirocco-faq
Henryhall1
Posts:6
Joined:Wed Jul 08, 2020 11:04 pm
fill in the right answer:15
Exterior moulding rear arch and sill removal

Post by Henryhall1 » Sun Jul 19, 2020 5:25 pm

Hi sadly have to make an appointment with the person who welds rear end needs some work. They have asked me to remove the rear arch and sill Moulding. Any advice on how to do this ? Thanks. Trevor



GT_II
Posts:315
Joined:Fri Feb 24, 2017 12:18 am
fill in the right answer:15
Location:Warwickshire

Re: Exterior moulding rear arch and sill removal

Post by GT_II » Sun Jul 19, 2020 6:12 pm



1992 VW Scirocco GT II 1.8 90PS Brilliant Black 30k
2011 VW Caddy Van C20 Startline 1.6 TDI 102PS 60k
2015 Skoda Yeti SE Outdoor 1.2 TSI DSG 105PS 30k
2013 Fiat 500 Pop 1.2 69PS 40k
2009 VW Fox 1.2 54PS 60k
2009 Smart Fortwo Passion 1.0 mhd 71PS 25k

Henryhall1
Posts:6
Joined:Wed Jul 08, 2020 11:04 pm
fill in the right answer:15

Re: Exterior moulding rear arch and sill removal

Post by Henryhall1 » Sun Jul 19, 2020 11:30 pm

Great thanks