A few bolt numbers if you please

NEW section - if you're having a mare with Vagcat and need a quick answer stick your requests in here. Keep things simple and only reply if you know the correct answer.
Don't know German? look here

Moderator:Scirocco Register

Forum rules
Be clear - e.g - Mk1 Bumper clips, Mk2 filler neck - 55l tank, Mk2 wiper motor (single wiper) - you get the drift?
andyneedham2
Posts:219
Joined:Wed Jul 08, 2009 8:24 pm
fill in the right answer:10
Location:Manchester
A few bolt numbers if you please

Post by andyneedham2 » Sat May 04, 2013 11:55 pm

Hi Guys,

I'm in the process of converting my GT2 to an ABF and I'm in need of some bolt numbers if anyone can help...? I'm a bit stuck however, as I'm unable to see either engine!

I need part numbers for:
- the bolts that hold on the engine mount (drivers side) to the block, they should be 4x hex bolts
- the engine mount (drivers side) bolt
- the bolts that hold the gearbox to the block, poss one or two through the starter motor??
- bolts for the front and rear engine mounts

As I mentioned, I am unable to see either engine at the moment so if anyone is able to take pics of these ares that would be very much appreciated.

Many thanks in advance,

Andy



User avatar
Blueshark
Posts:1123
Joined:Tue Apr 07, 2009 9:28 pm
fill in the right answer:10
Location:Vleuten, The Netherlands

Re: A few bolt numbers if you please

Post by Blueshark » Sun May 05, 2013 1:27 pm

andyneedham2 wrote:

I need part numbers for:
- the bolts that hold on the engine mount (drivers side) to the block, they should be 4x hex bolts
N 014 709 1 4x

- the engine mount (drivers side) bolt
N 010 472 11 1x

- the bolts that hold the gearbox to the block,
N 019 524 1 2x
N 902 992 01 1x

poss one or two through the starter motor??
N 044 760 1
N 044 742 1
1x each

- bolts for the front and
N 010 254 14 2x

rear engine mounts
Has no bolts just 3 M10 and 2 M12 nuts.
Greets, Joost



andyneedham2
Posts:219
Joined:Wed Jul 08, 2009 8:24 pm
fill in the right answer:10
Location:Manchester

Re: A few bolt numbers if you please

Post by andyneedham2 » Thu Oct 03, 2013 4:14 pm

Posted this a good while ago, sorry for the slow reply. Thanks very much Joost!

Andy



User avatar
Blueshark
Posts:1123
Joined:Tue Apr 07, 2009 9:28 pm
fill in the right answer:10
Location:Vleuten, The Netherlands

Re: A few bolt numbers if you please

Post by Blueshark » Thu Oct 03, 2013 8:05 pm

andyneedham2 wrote:Posted this a good while ago, sorry for the slow reply. Thanks very much Joost!

Andy
You are welcome, does it al fit and is it in place now?.



andyneedham2
Posts:219
Joined:Wed Jul 08, 2009 8:24 pm
fill in the right answer:10
Location:Manchester

Re: A few bolt numbers if you please

Post by andyneedham2 » Sun Nov 24, 2013 12:35 am

Wow, been away from the forum for a while now. Things have slowed down on the car front recently, mainly due to having a house, weather and a garage that is too small meaning that I can't have all parts present. So I have to collate the parts and then get the engine dropped in all in 1 go!

Got a friend booked to do some welding and I'll be dropping the block on soon! I really must start a thread to make myself progress with the build!

Andy